Wallpaper is one of the cheapest and best ways to decorate your walls. There is a large selection of different wallpapers on the market, which means that you can realize even the craziest ideas when decorating the interior. In addition, these can mask bad and damaged parts of the wall. Installing them is a very simple process and anyone can do it.
If you don’t know how to install these, we have some pro tips for you. Although anyone can install wallpaper on their wall, there are a few rules you should follow if you want to do this project well.
A place for wallpapers
Check out all available places before making a decision. Pay attention to the characteristics of the wall, because they will have a big impact on the final result. For example, paper wallpapers expand in contact with moisture, which means that the glue is applied directly to them. With other models, you can just apply the adhesive to the wall. However, experts do not recommend sticking wallpaper on freshly painted walls because in such conditions it might not last long. These are just a few reasons why you need to think carefully before you start applying wallpaper on the wall. Remember that no wall is perfectly straight, and so that the wallpaper is not crooked, determine before applying it where is the end of the first one. If you are not sure which place would be ideal for wallpaper, we have a few suggestions for you.
For example, opt for a room that has a fireplace or some other striking element. It is best to opt for a wall that gets a lot of attention in the room. Although the direction in which you glue is not so important, we recommend that the wallpaper ends near the door or corner, as this will achieve the best effect. There are several types of designs that fit into any space, and these are mainly stripes. It is also the simplest pattern for gluing. If you are of an adventurous spirit then you will be more interested in contrasting or alternating fit patterns. Maybe they require more attention, but you will be delighted with the result.
Preparing the wall
The surface of the wall on which you plan to install the wallpaper must be smooth and clean. That’s why preparation is an important part of the process. Since you want to do this job well, preparing the substrate must be a priority. The wall must be completely clean. Make sure you wipe everything thoroughly, because even the smallest speck of grease can spoil the whole process. If there was no wallpaper or other material on the walls, simply clean them with a mild detergent. However, surfaces that were previously exposed to wallpaper must be treated separately. For example, the older models were much more difficult to stick, but also to remove from the wall. If you have decorated your walls a long time ago, it will not be easy for you to remove them. So, get down to work as soon as possible and start slowly removing the material from the walls.
The damaged material must be removed, because it will start to come off on its own. All cracks in the wall should be filled, and after it dries, be sure to level the wall with sandpaper. As we said before, your wall is probably not as straight as the rest of you, so draw a line as a guideline for wallpaper installation. It is also necessary to apply a primer to seal the wall. One day before installation, wipe the surface with a damp cloth and then you can glue the new decoration.
Material and equipment
After you have chosen the place for the wallpaper, as well as the pattern, you still have to get the tools. Don’t forget to calculate how much wallpaper you need to achieve the desired look. You can check here price of banana leaves wallpaper which is one of the most popular patterns and the price, in general, is in that range so that will help you plan your budget. Get the cutting table, glue, brush and roller, scalpel, tape measure and laser for verticals as well. Another useful item is a plastic spatula that is used to squeeze excess air out of the wallpaper. That way, it will be much easier to stick them to the wall.
Installing wallpaper
Prepare the glue according to the manufacturer’s instructions and apply it to the wall with a roller if it is a larger area. For smaller areas and hard-to-reach places, use a brush. Next, measure the length of the wall so you know how much material you need. Don’t forget to check which direction the wallpaper pattern is going so you don’t create extra work for yourself. Once you cut the length, keep doing it and be sure to number them. Otherwise, you won’t know in which order you should install them. You will lay the first sample so that the bottom of the paper hangs on the floor. The paste is placed in the middle of the paper and then stretched towards the edges. You should imagine a herringbone shape and be guided by that when applying the glue.
Continue spreading the glue lengthwise until you have covered the entire surface. Pay attention to the lines you drew when gluing the wallpaper. Always leave a few cm of extra paper on the top part to adapt it to the wall later. When applying the paste to the wall, do not skimp on the material and use a roller. Always apply it to a larger area than you plan to use for wallpaper installation. Brushes are used for corners, the top of the wall, around the outlet and the like. This will prevent the wallpaper from lifting after it dries. You should also pay attention to the order of these if you have decided on patterns or patterns. Each subsequent row must match the previous one to achieve a clean and neat look.
Conclusion:
Wallpaper is a great way to decorate and beautify the look of rooms in your home. However, if you want to use the full potential of wallpaper, it is important to install it correctly. This means that you have found an adequate place for them, that you have prepared the surface well and glued the wallpaper correctly. This is not a difficult job which means you don’t need to call a handyman, all you need is to take care of the little things.
